How to Install a Water Softener Kit – Step by Step Guide
Installing a water softener kit in your London property is easier than you think. With our comprehensive kits and this step-by-step guide, you can improve your water quality in just a few hours.
📦 1. Unpack and Inspect Your Kit
Start by checking all parts included in your water softener kit: the resin tank, control valve, brine tank, bypass valve, tubing, and fittings. Ensure nothing is missing or damaged before beginning installation.
🔧 2. Choose the Right Installation Spot
Select a location close to the main water supply line and with access to a drain and power socket. It’s ideal to install the unit before your boiler or water heater to protect the entire plumbing system.
🛠 3. Connect the Water Softener
Shut off your main water supply. Use the included fittings to connect the inlet and outlet pipes to the bypass valve. Make sure the flow direction matches the kit instructions for correct operation.
🔌 4. Set Up Drainage and Overflow
Attach the drain line to the brine tank and route it to a nearby drain. This is essential for the regeneration process. Ensure the hose is secured and allows gravity flow.
⚙️ 5. Program and Start the System
Fill the brine tank with salt, plug in the unit, and follow the digital control instructions to program regeneration times and water hardness levels. Then, slowly turn the main water back on and check for leaks.
✅ 6. Final Checks and Testing
Run a test cycle to ensure the system is functioning correctly. Check water softness at your tap after the first cycle to confirm successful installation. You’re now protected from hard water damage!